Reloading Tools

Lee shell plate #5l for load-master

FEATURES
-#5L quick change shell plate
-For Load-Master Press
-For .270 Winchester Short Magnum, .303 British, .30-40 Krag, .300 Magnum & similar

Rcbs formula 1 walnut media dry polishing

FEATURES:
-Dry media can be used in both Sidewinder & Vibratory Case Cleaners
-Ground to a 12/12 sieve size
-Polish comes individually packed so you can choose various amounts of media to mix

Lee app automatic processing press
Other Features: The fastest and easiest way to deprime, size, swage, bulge bust, flare, and size cast bullets.Almost unlimited visibility and hand clearence.Accepts standard 7/8-14 dies and shell holders of any manufacturer.Includes press, automation kit, bottle adaptor ,shellholders #2, #4, and #19.

Lee loader.243 winchester

FEATURES
-Complete reloading system for.243 Winchester
-Does not include rubber mallet

Rcbs case lube pad

FEATURES
-The best way to lubricate cases for resizing or forming
-Coat the pad with Case Lube-2, then roll the case lightly across it
-Exactly the right amount of lubricant it transferred to the case
-The pad can be removed from the sealable storage case for easy cleaning

Rcbs rotary case trimmer pilot.25 caliber

FEATURES
-.25 caliber
-Tapered to guide pilot into the case mouth
-Prevents case from wobbling when being trimmed to length
-For use with RCBS® Trim Pro® Case Trimmers, Rotary Case Trimmer-2 & Rotary Case Trimmer
-For use with RCBS Case Trimmers only

Lee x-press shellholder #21
Other Features: X-press shell holder for app automatic processing press.Allows the case to pass through the shell holder after operations are performed.Fits 6.8 spc, and 224 valkyrie

Lee x-press shellholder #8
Other Features: X-press shell holder for app automatic processing press.Allows the case to pass through the shell holder after operations are performed.Fits 33 win, 348 win, 40-65, and 45-70.

Rcbs chamber case length gauge.38 special
Other Features: Designed to quickly check case length, diameter, and overall cartridge length of your handloaded ammo.

Lee shell plate #3 for auto breech lock pro

FEATURES:
-Works w/ cartridges: 45 Winchester Mag

Rcbs fl die set.300 remington ultra mag.Gp-a

FEATURES
-Caliber: .300 Remington Ultra Magnum
-This two-die set is intended for reloading bottleneck cases, & consists of a Full-Length Sizer Die
with an Expander-Decapping Unit, & a Seater Die with Bullet Seater Plug.
-The Full-Length Sizer Die brings the case to SAAMI minimum cartridge dimensions
-It sizes the outside of the case, de-primes & expands the neck to accept the bullet
-The die vents to prevent case damage caused by trapped air & for excessive lubricant
-Headspace is held to minimum tolerances to avoid changing the case body length during full length sizing
-Then included Seater Die has a built-in roll crimper to secure the bullet at the same time as it's seated

Rcbs primer pocket brush head large

FEATURES
-Removes residue in primer pockets with a couple of twists
-Stainless bristles & interchangeable mounts

Rcbs fl die set.22 hornet gp-a

FEATURES
-Caliber: .22 Hornet
-This two-die set is intended for reloading bottleneck cases, & consists of a Full-Length Sizer Die
with an Expander-Decapping Unit, & a Seater Die with Bullet Seater Plug.
-The Full-Length Sizer Die brings the case to SAAMI minimum cartridge dimensions
-It sizes the outside of the case, de-primes & expands the neck to accept the bullet
-The die vents to prevent case damage caused by trapped air & for excessive lubricant
-Headspace is held to minimum tolerances to avoid changing the case body length during full length sizing
-Then included Seater Die has a built-in roll crimper to secure the bullet at the same time as it's seated

Rcbs fl die set.257 wby.Mag.Gp-a

FEATURES
-Caliber: .257 Weatherby Magnum
-This two-die set is intended for reloading bottleneck cases, & consists of a Full-Length Sizer Die
with an Expander-Decapping Unit, & a Seater Die with Bullet Seater Plug.
-The Full-Length Sizer Die brings the case to SAAMI minimum cartridge dimensions
-It sizes the outside of the case, de-primes & expands the neck to accept the bullet
-The die vents to prevent case damage caused by trapped air & for excessive lubricant
-Headspace is held to minimum tolerances to avoid changing the case body length during full length sizing
-Then included Seater Die has a built-in roll crimper to secure the bullet at the same time as it's seated

Lee factory crimp die only.204 ruger

FEATURES
-Factory crimp die for .204 Ruger
-Crimps bullet in place more firmly than any other tool
-A firm crimp improves accuracy
-Higher start pressure insures a more uniform pressure curve & less velocity variation

Rcbs shell holder #25

Rcbs shell holder #5

FEATURES
-Shell Holder #5
-Built from hardened steel
-Designed to properly align the case with the reloading die in single-stage & turret presses
-Sized to fit specific case heads & capture 0.125" of the case head for proper SAAMI head spacing

Hornady lnl oal gauge curve

FEATURES:
-Curved model
-For all autoloader, lever-action, or pump-action rifles
-Also fits all bolt-action & single-shot firearms
-Inserts into chamber through ejection port
-To use the Lock-N-Load® O.A.L Gauge, you will need a Modified Case (sold separately) to fit your
firearm's chamber & thread it onto the gauge
-Dimensions obtained will be accurate to .001"

*Not compatible with Adapter "D" or short-bodied cases

Rcbs rotary case trimmer pilot.44 caliber

FEATURES
-.44 caliber
-Tapered to guide pilot into the case mouth
-Prevents case from wobbling when being trimmed to length
-For use with RCBS® Trim Pro® Case Trimmers, Rotary Case Trimmer-2 & Rotary Case Trimmer
-For use with RCBS Case Trimmers only

Rcbs fl die set.30-40 krag gp-a

FEATURES
-Caliber: .30-40 Krag
-This two-die set is intended for reloading bottleneck cases, & consists of a Full-Length Sizer Die
with an Expander-Decapping Unit, & a Seater Die with Bullet Seater Plug.
-The Full-Length Sizer Die brings the case to SAAMI minimum cartridge dimensions
-It sizes the outside of the case, de-primes & expands the neck to accept the bullet
-The die vents to prevent case damage caused by trapped air & for excessive lubricant
-Headspace is held to minimum tolerances to avoid changing the case body length during full length sizing
-Then included Seater Die has a built-in roll crimper to secure the bullet at the same time as it's seated

Rcbs chamber case length gauge.300 win mag
Other Features: Designed to quickly check case length, diameter, and overall cartridge length of your handloaded ammo.

Rcbs competition powder measure pistol/small rifle
Other Features: Accurately meter by volume all types of powder for pistol and and small rifle from.5 to 40 grains.

Rcbs shell holder #44

FEATURES
-Shell Holder #44
-Built from hardened steel
-Designed to properly align the case with the reloading die in single-stage & turret presses
-Sized to fit specific case heads & capture 0.125" of the case head for proper SAAMI head spacing

Rcbs collet for bullet puller.500 caliber

FEATURES
-Caliber: .500 Cal
-This collet is designed to be used with the RCBS® Standard Bullet puller to remove bullets from a wide
range of cases

Rcbs ar series die set w/taper crimp seater.300aac blackout

FEATURES
- Caliber: .300AAC Blackout
- Feature a Small Base Sizer Die designed for semi-automatic firearms, and a Taper Crimp Seater Die
-The Small Base Sizer guarantees the cartridge will rechamber in AR-platform weapons
- 2 dies/set

Mec wad finger 20ga

FEATURES
-20 Gauge
-Funnels the was through the crimp & into the wad chamber of the casing
-Fits all older MEC reloaders produced before 1983

Rcbs ar series die set w/taper crimp seater.223 remington

FEATURES
- Caliber: .223 Remington/5.56mm
- Feature a Small Base Sizer Die designed for semi-automatic firearms, and a Taper Crimp Seater Die
-The Small Base Sizer guarantees the cartridge will rechamber in AR-platform weapons
- 2 dies/set

Lee full length 2-die set.25wssm

FEATURES
-Lee Pacesetter 2-Die Set
-25 Winchester Super Short Magnum (WSSM)
-Steel material
-Includes: Sizer Die and Bullet Seater Die with built in Roll Crimp
-Threads: 7/8"-14
-Accessories: Shellholder, Powder Dipper, Load Data Sheet, Plastic Container
-Adjustable crimp
-Built to last a lifetime and are great at producing factory like ammunition.

Lee trimmer gauge.300wsm

FEATURES
-For .300 Winchester Short Magnum
-Case Length Gauge
-Precise, easy way to trim to length & square the case mouth
-Used with the Cutter & Lock Stud or Zip Trim

Rcbs shell holder #17

FEATURES
-Shell Holder #17
-Built from hardened steel
-Designed to properly align the case with the reloading die in single-stage & turret presses
-Sized to fit specific case heads & capture 0.125" of the case head for proper SAAMI head spacing

Rcbs deburring tool 17-60 cal

FEATURES
-.17-.60 caliber
-Allows the inside & outside chamfering & deburring of cases
-Made of hardened steel

Lee spline drive breech lock bushing 4 pack