Reloading Tools

Lee lube & sizing kit.452

FEATURES
-For .452
-Lubricates & sizes cast bullets
-Seats & crimps gas checks
-Fits any standard 7/8x14 thread reloading press
**DOES NOT INCLUDE LUBE**

Other Features: **lube not included**

Lee ultimate 4-die rifle set.223 remington

FEATURES
-Ultimate 4-die set for .223 Remington
-Full length resizing die
-Collet necksizing die
-Easy adjust dead length bullet seating die
-Factory Crimp Die
-Shell holder
-Powder measure
-Load data

Other Features: Includes collet neck sizer die and factory crimp die.

Lee a-p shellholder #13

FEATURES
-#13 priming tool shell holder
-For .45 Auto Rim& similar

Lee collet 2-die set 7mm-08 remington

FEATURES
-7mm/08 Remington
-2 piece Collet die set
-Collet die that uses a collet to squuze a mandrel
-Dead length bullet seater die
-Shell holder
-Powder dipper
-Loading data

Lee factory crimp die only.300wsm_

FEATURES:
-Caliber: 300 Winchester Short Magnum
-Factory Crimp
-Threads: 7/8" - 14

Rcbs rotary case trimmer pilot.44 caliber

FEATURES
-.44 caliber
-Tapered to guide pilot into the case mouth
-Prevents case from wobbling when being trimmed to length
-For use with RCBS® Trim Pro® Case Trimmers, Rotary Case Trimmer-2 & Rotary Case Trimmer
-For use with RCBS Case Trimmers only

Lee full length 3-die set 7.62x39 russian

FEATURES
-Pacesetter 3 die set for 7.62x39 Russian
-Full length sizing die
-Bullet seating die
-Factory crimp die
-Universal shell holder
-Powder dipper
-Instructions/load data

Lee factory crimp die only.300 weatherby magnum

FEATURES
-Factory crimp die for .300 Weatherby
-Crimps bullet in place more firmly than any other tool
-A firm crimp improves accuracy
-Higher start pressure insures a more uniform pressure curve & less velocity variation

Mec wad finger 20ga

FEATURES
-20 Gauge
-Funnels the was through the crimp & into the wad chamber of the casing
-Fits all older MEC reloaders produced before 1983

Rcbs collet for bullet puller.500 caliber

FEATURES
-Caliber: .500 Cal
-This collet is designed to be used with the RCBS® Standard Bullet puller to remove bullets from a wide
range of cases

Lee collet 2-die set.50bmg

FEATURES
-.50 BMG
-2 piece Collet die set
-Collet die that uses a collet to squeeze a mandrel
-Dead length bullet seater die
-Loading data

Other Features: Does not include shell holder or powder dipper.

Lee collet sizing die only.30-06 springfield

FEATURES
-.30-06 Springfield
-Collet die only
-Sizes just the neck
-Needs no lubrication

Lee quick trim die body 7x57 mauser

FEATURES
-Quick trim die for 7x57 Mauser

Lee shell plate carrier #11

FEATURES
-Lee Pro Carrier #11 Complete
-Used to change calibers on the Pro 1000
-Includes carrier, shell plate, folding primer tray, case ejector, auto index, & spare parts

Other Features: Includes large primer feeder #11 shellplate, & carrier

Lee powder thru charging die.44 special/.44 magnum

FEATURES
-For .44 Special
-Powder Thru Expanding die
-Charges the case while expanding the case mouth
-Used with powder funnel adapter or the Auto Disk or Auto Pro Disk powder measure

Lee carbide 3-die set.45 auto rim

FEATURES
-For .45 Auto Rim
-3-die set
-Carbide full length sizing die
-Bullet seating die
-Powder thru expanding die
-Universal shell holder
-Powder dipper
-Instructions/load data

Lee auto index hex ratchet

FEATURES
-Replacement Hex Ratchets
-For the 3-Hole Turret Press & Pro 1000

Lee trimmer gauge 6.8 rem spc

FEATURES
-For 6.8 Remington Special
-Case Length Gauge
-Precise, easy way to trim to length & square the case mouth
-Used with the Cutter & Lock Stud or Zip Trim

Lee press shellholder r-3

FEATURES
-R-3 universal shell holder
-For.30-30, 6.5x55 Mauser, .32-40 & similar

Other Features: Fits rifles: 30 herrett; 22 savage; 30/30 win; 219 zipper; 32 win spec; 25/35 32 win s.L.6.5x55 mauser; 32/40 win;7x30 waters; 356 win; 7.5mm schmidt 375 win; 7.65x53 arg master 38/55 win

Lee full length 3-die set.308 winchester

FEATURES
-Pacesetter 3 die set for .308 Winchester
-Full length sizing die
-Bullet seating die
-Factory crimp die
-Universal shell holder
-Powder dipper
-Instructions/load data

Lee six cavity mold.38 158gr-swc no gc no handle

FEATURES
-Six Cavity Mold
-.358 Diameter
-158 grain
-Semi Wad Cutter nose bullet
-Suitable for cartridges like .38 Special, .38 Smith & Wesson, .38 Colt New Police, .357 Magnum
-Lube & handles sold separately

Hornady shell holder #1

FEATURES:
-Shell holder #1
-Precision machined from solid steel then heat treated to perform flawlessly for the life of the press

Lee app automatic processing press
Other Features: The fastest and easiest way to deprime, size, swage, bulge bust, flare, and size cast bullets.Almost unlimited visibility and hand clearence.Accepts standard 7/8-14 dies and shell holders of any manufacturer.Includes press, automation kit, bottle adaptor ,shellholders #2, #4, and #19.

Lee rgb 2-die set.22-250 remington

FEATURES
-For .22-250 Remington
-Full length sizer die
-Easy adjust dead length bullet seating die (no crimp)

Lee powder measure kit 15 different dippers

FEATURES
-Includes 15 graduated powder dippers from .3 cc to 4.3 cc
-Slide card included has powder dispensing chart
-Powder measures are inherently safe as they cannot get out of adjustment

Other Features: Includes loading data

Lee full length 3-die set.38-55 winchester

FEATURES
-Pacesetter 3 die set for .38-55 Winchester
-Full length sizing die
-Bullet seating die
-Factory crimp die
-Universal shell holder
-Powder dipper
-Instructions/load data

Lee double cavity mold.450-200gr w/handles_

FEATURES
-Lee 2-Cavity Bullet Mold
-450-200-1R (450 Diameter)
-200 grain Round Nose (1 Ogive Radius Conical)
-Machined aluminum mold blocks and hard anodized sprue plate, rust resistant
-Tangential cut off which helps to eliminate the nip at the sprue cut off
-Includes hardwood handles
-Great choice for reloaders looking for a quality mold at an affordable price

Lee double cavity mold.309-113-f w/handles

FEATURES
-Produces a gas checked .309 diameter 113 grain round
-Flat bullet
-Suitable for .30 caliber cartridges
-Handles included

Lee collet 2-die set.222 remington

FEATURES
-For .222 Remington
-Collet die set
-Includes a Collet die, Dead length bullet seater die, shell holder, powder dipper, and loading data

Lee quick trim die body.204 ruger

FEATURES
-Quick trim die for .204 Ruger

Lee full length 3-die set.30-40 krag

FEATURES
-Pacesetter 3 die set for .30-40 Krag
-Full length sizing die
-Bullet seating die
-Factory crimp die
-Universal shell holder
-Powder dipper
-Instructions/load data

Lee factory crimp only.270 winchester

FEATURES
-Factory crimp die for .270 Winchester
-Crimps bullet in place more firmly than any other tool
-A firm crimp improves accuracy
-Higher start pressure insures a more uniform pressure curve & less velocity variation