Reloading Tools

Lee full length 3-die set.30-40 krag

FEATURES
-Pacesetter 3 die set for .30-40 Krag
-Full length sizing die
-Bullet seating die
-Factory crimp die
-Universal shell holder
-Powder dipper
-Instructions/load data

Lee carbide 3-die set.480 ruger

FEATURES
-For .480 Ruger
-3-die set
-Carbide full length sizing die
-Bullet seating die
-Powder thru expanding die
-Universal shell holder
-Powder dipper
-Instructions/load data

Mec wad finger 20ga

FEATURES
-20 Gauge
-Funnels the was through the crimp & into the wad chamber of the casing
-Fits all older MEC reloaders produced before 1983

Hornady shell holder #1

FEATURES:
-Shell holder #1
-Precision machined from solid steel then heat treated to perform flawlessly for the life of the press

Rcbs rotary case trimmer pilot.44 caliber

FEATURES
-.44 caliber
-Tapered to guide pilot into the case mouth
-Prevents case from wobbling when being trimmed to length
-For use with RCBS® Trim Pro® Case Trimmers, Rotary Case Trimmer-2 & Rotary Case Trimmer
-For use with RCBS Case Trimmers only

Lee safety powder scale- red

FEATURES
-Reliable, accurate, & simple to use
-Beam is made from a tough Phenolic
-Sensitive & readable to 1/20 grain

Lee collet die set.338 lapua magnum lg series

FEATURES
-.338 Lapua
-Large series 2 piece Collet die set
-1 1/4x12 thread
-Use with Classic Cast Press only
-Collet neck sizing die
-Bullet seating die
-Instructions

Lee bullet feed die w/fingers 9mm-.365 diameter (.46")

FEATURES
-Used for9mm to .365caliber bullets with lengthsup to .46"long
-Converts the Bullet Feed Kit to another caliber or length of bullet

Lee full length 3-die set 7.62x39 russian

FEATURES
-Pacesetter 3 die set for 7.62x39 Russian
-Full length sizing die
-Bullet seating die
-Factory crimp die
-Universal shell holder
-Powder dipper
-Instructions/load data

Lee quick trim die body 7x57 mauser

FEATURES
-Quick trim die for 7x57 Mauser

Hornady magnum digital vibratory tumbler

FEATURES:
-Clean & polish large quantities of brass quickly & efficiently
-Larger drum holds up to (600) 38 Special cases, (250) 30-06 cases or equivalent
-Tumble for up to eight hours w/ digital timer
-Vibratory action cleans brass to brilliant shine
-Tumbling makes dies & other equipment operate more smoothly

Lee factory crimp die only.300 weatherby magnum

FEATURES
-Factory crimp die for .300 Weatherby
-Crimps bullet in place more firmly than any other tool
-A firm crimp improves accuracy
-Higher start pressure insures a more uniform pressure curve & less velocity variation

Lee full length 3-die set 7.65 argentine mauser

FEATURES
-Pacesetter 3 die set for 7.65 Argentine Mauser
-Full length sizing die
-Bullet seating die
-Factory crimp die
-Universal shell holder
-Powder dipper
-Instructions/load data

Lee x-press shellholder #21
Other Features: X-press shell holder for app automatic processing press.Allows the case to pass through the shell holder after operations are performed.Fits 6.8 spc, and 224 valkyrie

Lee lube & sizing kit.329"

FEATURES
-For .329
-Lubricates & sizes cast bullets
-Seats & crimps gas checks
-Fits any standard 7/8x14 thread reloading press
**DOES NOT INCLUDE LUBE**

Other Features: **lube not included**

Lee collet 2-die set.222 remington

FEATURES
-For .222 Remington
-Collet die set
-Includes a Collet die, Dead length bullet seater die, shell holder, powder dipper, and loading data

Lee rgb 2-die set.22-250 remington

FEATURES
-For .22-250 Remington
-Full length sizer die
-Easy adjust dead length bullet seating die (no crimp)

Lee press shellholder r-3

FEATURES
-R-3 universal shell holder
-For.30-30, 6.5x55 Mauser, .32-40 & similar

Other Features: Fits rifles: 30 herrett; 22 savage; 30/30 win; 219 zipper; 32 win spec; 25/35 32 win s.L.6.5x55 mauser; 32/40 win;7x30 waters; 356 win; 7.5mm schmidt 375 win; 7.65x53 arg master 38/55 win

Hornady a-tip seating stem 30 cal.308 176gr.

Rcbs collet for bullet puller.500 caliber

FEATURES
-Caliber: .500 Cal
-This collet is designed to be used with the RCBS® Standard Bullet puller to remove bullets from a wide
range of cases

Lee collet 2-die set.50bmg

FEATURES
-.50 BMG
-2 piece Collet die set
-Collet die that uses a collet to squeeze a mandrel
-Dead length bullet seater die
-Loading data

Other Features: Does not include shell holder or powder dipper.

Rcbs case lube pad

FEATURES
-The best way to lubricate cases for resizing or forming
-Coat the pad with Case Lube-2, then roll the case lightly across it
-Exactly the right amount of lubricant it transferred to the case
-The pad can be removed from the sealable storage case for easy cleaning

Lee full length 3-die set.358 winchester

FEATURES
-Pacesetter 3 die set for .358 Winchester
-Full length sizing die
-Bullet seating die
-Factory crimp die
-Universal shell holder
-Powder dipper
-Instructions/load data

Lee carbide 3-die set.45 auto rim

FEATURES
-For .45 Auto Rim
-3-die set
-Carbide full length sizing die
-Bullet seating die
-Powder thru expanding die
-Universal shell holder
-Powder dipper
-Instructions/load data

Lee factory crimp die only.300 remington ultra magnum

FEATURES
-Factory crimp die for .300 Remington Ultra Magnum & .300 H&H
-Crimps bullet in place more firmly than any other tool
-A firm crimp improves accuracy
-Higher start pressure insures a more uniform pressure curve & less velocity variation

Lee full length 3-die set.308 winchester

FEATURES
-Pacesetter 3 die set for .308 Winchester
-Full length sizing die
-Bullet seating die
-Factory crimp die
-Universal shell holder
-Powder dipper
-Instructions/load data

Hornady g3 1500 electronic scale

Lee classic cast press kit.50bmg

FEATURES
-For 50 BMG
-Includes Classic Cast Press that accepts both 7/8x14 and 1 1/4x12 thread dies,
50 BMG 2-die set, shell holder, Ram Prime and case lube

Other Features: Includes set of 50 bmg dies shellholder ram prime tool and tube of sizing lube, shell insert, large & small primer arm and die reducer

Rcbs shell holder #17

FEATURES
-Shell Holder #17
-Built from hardened steel
-Designed to properly align the case with the reloading die in single-stage & turret presses
-Sized to fit specific case heads & capture 0.125" of the case head for proper SAAMI head spacing

Lee factory crimp die only.50bmg

FEATURES:
-Caliber: 50 BMG
-Factory Crimp
-Threads: 1-1/4" - 12

Lee app automatic processing press
Other Features: The fastest and easiest way to deprime, size, swage, bulge bust, flare, and size cast bullets.Almost unlimited visibility and hand clearence.Accepts standard 7/8-14 dies and shell holders of any manufacturer.Includes press, automation kit, bottle adaptor ,shellholders #2, #4, and #19.

Lee shell plate #3 for auto breech lock pro

FEATURES:
-Works w/ cartridges: 45 Winchester Mag